• More News

    Discover ViTrox’s Latest and Advanced Wafer Inspection Solution – the Wi8i G2 PRO!

    Wi8i G2 PRO machine outlook (1)

    Wafer inspection is always a critical stage for quality assurance for wafer foundry, integrated device manufacturing (IDM), fabless, and outsourced semiconductor assembly & test (OSAT). Since semiconductor devices are continuously getting smaller and more complex, the requirement for wafer inspection has become more stringent to accommodate these changes. However, defects on the wafer may be overlooked and may pass through the final stages of fabrication and assembly if they are not eliminated or filtered out, which could be a costly mistake for the manufacturers. Consequently, this will lead to increasing demand for quality wafer production.

    At ViTrox, we aim to be the World’s Most Trusted Technology Company in providing innovative, advanced, and cost-effective automated Machine Vision Inspection Solutions. Therefore, we would like to introduce our all-new Wi8i G2 PRO Wafer Vision Inspection Handler, which is designed to offer high flexibility in wafer handling, cover different semiconductor processes and high-accuracy inspection results to the users of the semiconductor market, and is also an expansion to the inspection capabilities of our existing Wafer Vision Inspection Hander – Wi8i G2.

    One Solution For Two Semiconductor Processes

    The all-new Wi8i G2 PRO solution is enhanced with hardware and programming features to accommodate both bare wafers (pre-dicing process) and mounted wafers (post-dicing process) inspection requirements. This innovative configuration eliminates the need for hardware conversion on the wafer robot arm when inspecting these two wafer types of the same size, which is suitable for production involving both pre-and-post-dicing processes and/or having a high-mix-low-volume of bare and mounted wafers. Hence, our Wi8i G2 PRO is the ideal solution to deliver high overall equipment effectiveness (OEE) which guarantees excellent wafer quality without any machine stop time.

    Ability To Handle Up To 12” Wafers & FOUP

    Based on the current market trend, there is a demand for wafer inspection equipment to cater to larger wafers due to the increasing number of chip-related productions. To address this, our Wi8i G2 PRO offers a significant enhancement in catering to a new type of wafer carrier box, Front Opening Unified Pod (FOUP) which is particularly important to users with such production practice to accommodate 12 inches of bare wafer transferring. Nowadays, FOUPs are the preferred carrier boxes to handle raw water because FOUPs offer a sealed wafer environment that provides static protection, white-light shielding, and control of moisture and oxygen. Today’s FOUPs not only address particles, but also minimise and control volatile organic compounds (VOCs), oxygen, and relative humidity. Any of these potential contamination sources can negatively impact device yield. Alternatively, should the user need to handle framed wafers, they can opt for a metal cassette instead.

    Users are also able to configure their load ports based on their production needs, which can be either:

    1. FOUP + Metal cassette
    2. FOUP + FOUP
    3. Metal cassette + Metal cassette

    This load port design accommodates both 8 inches and 12 inches of metal cassettes on the load ports, which translates to cost-effectiveness on different-sized wafer inspections!

    Robust Wafer Inspection With Our Advanced Vision Optics

    Wi8i G2 PRO is not only equipped with robust vision optics that provides high-quality image under different magnification lenses but also integrates an advanced deep-learning algorithm in defect detection and determining the defect types. When a user’s wafer has a complex circuit design and/or is required to inspect different defect types at different regions, this algorithm is the perfect solution for enhancing the accuracy of defect detection. With the combination of cutting-edge wafer handling mechanisms and robust wafer vision inspection, our latest Wafer Inspection Solution is guaranteed to solve your production pain points! Additionally, we also seek to better understand our customers’ needs in their production line and boost their production yield and also significantly reduce their long-term costs.

    Interested to know more about our Wi8i G2 PRO? Do get in touch with our Sales Expert Ms Kong Poh Mei ([email protected]). To top it off, we also invite you to visit us here at ViTrox Campus 2.0 in Penang, Malaysia for a demonstration of the solution. We look forward to serving you!